Snap Weights (and the like) on Leadcore Rigs

[Live2fishdjs]

Picked up a couple 5 color rigs and have some 2 colors, and full cores as well. Any of you run snap weights with your core? If so, what are the set-ups you use and what part of the water column are you targeting?

[GLF]

I went on a charter trip last year. We had a really good trip and caught lots of nice kings. I kick myself in the arse for not paying better attention and asking questions.

Anyways, they had egg sinkers on their lead cores. I did not pay attention how they stopped them or if they were on a half core.

Anyone have some insight???

[Steve Arend]

The rule of thumb for snap weights is for ever oz. of lead you’ll drop 10ft.

So if you are running a half core your down around that 20-25 ft mark, add a 1oz. snap weight you be around that 30-35 ft. mark. 2 oz. snap weight around 40-45 ft. and so on.

To add the snap weights to the core just add it onto the backer right behind the core/backer knot. You can use the snap weight pinch-pads or the poor man’s snap weight which I use, a rubber coated snap swivel used for stacking down rigger called a “Stacker Sticker†they take a little more time to remove from the line when fighting a fish but are a lot cheaper then a snap weight kit. Now once you add the snap weight to the line you want to run 50-60 ft of line out before adding your inline board or clipping it to your otter boards.

[CaptLevi]

Righto Stevo!

I run snap weights on core quite often. Especially if I am getting bit on 15 colors. Since I only have 2 rods set up with 15 color, I just add weight to a couple 10's or 12.5's.

I was running 2.5 lead core for shallow biters but now I just run the snap weights there too. Saves on having too many rods kickin around.

[Treblemaker]

Anyways, they had egg sinkers on their lead cores. I did not pay attention how they stopped them or if they were on a half core.

Anyone have some insight???

Mike, this is another way to add a weight to leadcore that will drop off when you get a fish. After you let out the core you fold the backer line in half and send it through the egg sinker. Then using a small piece of rubber band through the loop to keep the egg sinker on. You will need to experiment depending on line diameter and rubber band size to get a clean release when you get a fish.

[Live2fishdjs]

Mike, this is another way to add a weight to leadcore that will drop off when you get a fish. After you let out the core you fold the backer line in half and send it through the egg sinker. Then using a small piece of rubber band through the loop to keep the egg sinker on. You will need to experiment depending on line diameter and rubber band size to get a clean release when you get a fish.

That idea I like...I have a ton of egg sinkers I got cheap at one point or another to try and make my own river weights with and really have not ever done it.

[GLF]

Mike, this is another way to add a weight to leadcore that will drop off when you get a fish. After you let out the core you fold the backer line in half and send it through the egg sinker. Then using a small piece of rubber band through the loop to keep the egg sinker on. You will need to experiment depending on line diameter and rubber band size to get a clean release when you get a fish.

Thanks for the reply Tim.

He had the line running though the sinkers and the sinkers would slide up or down the line. I am guessing he used a rubber band or something to hold them in place :confused: