Briand7878 Posted September 12, 2017 Share Posted September 12, 2017 I am new to fishing the big lake. I went out today and caught three fish about five pounds each. Question...I bought cannon releases that work by pressure. On the second setting the lure will work its way out on its own. On the third setting none of the three fish tripped the release. Did I just get in that window where my release won't work? What is a good quality release that's reliable? Second I'm about to toss my magnum dipsys. Every time I attempted to use one it tangles around my rigger. I run the dipsy on 2.5 to the left and it still gets in to my rigger. I place the dipsy out first like I believe you are supposed to do. The only thing I can figure is that it's my poor driving, weaving like a drunk that's doing it. What should I do? Sent from my iPhone using Great Lakes Fisherman Mobile App Link to comment Share on other sites More sharing options...
jdh Posted September 13, 2017 Share Posted September 13, 2017 I use Blacks releases. Used pinch release for about 3 trips back when I started and gave up on them quick. I haven't had a single problem problem with them. With regards to divers, you're doing something wrong. Not sure what though. Ask someone who looks friendly at the boat launch about your setup. Poor driving will tangle divers quickly though. Nice job getting into a few fish! Link to comment Share on other sites More sharing options...
Briand7878 Posted September 13, 2017 Author Share Posted September 13, 2017 Ok I will try those releases. It's hard to drive a small boat and rig stuff on your own. I need to bring a helper with me. Sent from my iPhone using Great Lakes Fisherman Link to comment Share on other sites More sharing options...
jdh Posted September 13, 2017 Share Posted September 13, 2017 Post a picture of your rig when you get a chance and I'm sure more people will chime in! -JD Link to comment Share on other sites More sharing options...
mrhookup Posted September 13, 2017 Share Posted September 13, 2017 Ok I will try those releases. It's hard to drive a small boat and rig stuff on your own. I need to bring a helper with me. Sent from my iPhone using Great Lakes FishermanThat's probably your problem, if you don't have autopilot having someone on the wheel at all times is a must. Before buying a bigger boat we used to fish 9 lines off a 16' Tin Can with a 5' beam no problem, just gotta keep it straight and gentle on the turns until you get a better sense for how sharply you can turn without tangling. Happy to help if you post pictures of your rig like JD stated.Sent from my iPhone using Great Lakes Fisherman Mobile App Link to comment Share on other sites More sharing options...
budwinn42 Posted September 13, 2017 Share Posted September 13, 2017 Are you putting your dipsy on 2.5 to the left off of starboard, or port? Sent from my iPhone using Great Lakes Fisherman Link to comment Share on other sites More sharing options...
Dr Hook Posted September 13, 2017 Share Posted September 13, 2017 1 hour ago, budwinn42 said: Are you putting your dipsy on 2.5 to the left off of starboard, or port? Sent from my iPhone using Great Lakes Fisherman That was my thought, if you're setting dipsey to left it should be running on port side. Otherwise it may not be your dipsey. Heavier rigger weights to reduce blowback may help and pancake weights will catch more of a crosscurrent than cannonballs or torpedoes. 1 Link to comment Share on other sites More sharing options...
Briand7878 Posted September 13, 2017 Author Share Posted September 13, 2017 That was my thought, if you're setting dipsey to left it should be running on port side. Otherwise it may not be your dipsey. Heavier rigger weights to reduce blowback may help and pancake weights will catch more of a crosscurrent than cannonballs or torpedoes.They were set at 2.5 left on the port side of the boat. I would post a picture but I took the boat apart already. I live in central Indiana and it's primarily my bass boat. It's a ranger vs 1780 with triple trees off the side and riggers directly behind them. The riggers are penn fathom master 625s. Sent from my iPhone using Great Lakes Fisherman Mobile App Link to comment Share on other sites More sharing options...
jdh Posted September 13, 2017 Share Posted September 13, 2017 Are you running the divers off of the triple tree? If the angle is too high on the diver rod you'll have trouble getting separation. Diver rod holders are usually best just above horizontal. Link to comment Share on other sites More sharing options...
EdB Posted September 13, 2017 Share Posted September 13, 2017 On your mag divers, it helps to keep steady pressure on them when deploying them. If you let line out quickly with no pressure, they will drop right back into your rigger cables due to their extra weight. When I deploy them, I just back off the drag some and let it slowly pull out line under drag pressure. This keeps the diver digging and pulling away from the boat instead of sinking and dropping straight back. I usually have a crew member watch the counter and I go set another rod. Sometimes I'll have 2 or 3 dipseys all deploying like this at the same time. It is less of an issue with regular divers but if running 4 divers, I deploy all under pressure. Link to comment Share on other sites More sharing options...
Briand7878 Posted September 13, 2017 Author Share Posted September 13, 2017 Are you running the divers off of the triple tree? If the angle is too high on the diver rod you'll have trouble getting separation. Diver rod holders are usually best just above horizontal.No I placed them horizontal and put the dipsys out first before the riggers. I did let them out under the pressure with drag. I'm sure it was probably due to not having a driver while deploying the dipsys. The currents were pretty strong and turned me all over the place. Sent from my iPhone using Great Lakes Fisherman Mobile App Link to comment Share on other sites More sharing options...
budwinn42 Posted September 13, 2017 Share Posted September 13, 2017 Next time maybe start dead center in the back of the boat, and as you let it out, watch to make sure it's going the right way. A friend of mine was certain he was setting his dipsys correct and the first time I "checked his work" he had them adjusted incorrectly, and was setting the wrong one off the wrong side. Sent from my iPhone using Great Lakes Fisherman Link to comment Share on other sites More sharing options...
Steelhead#1 Posted September 16, 2017 Share Posted September 16, 2017 How many pounds is your rigger ball? Link to comment Share on other sites More sharing options...
Briand7878 Posted September 16, 2017 Author Share Posted September 16, 2017 How many pounds is your rigger ball?Ten lbsSent from my iPhone using Great Lakes Fisherman Mobile App Link to comment Share on other sites More sharing options...
Nailer Posted September 18, 2017 Share Posted September 18, 2017 Setting up going with the waves will help keep the boat going straight. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now