PolymerKnot Posted June 1, 2014 Posted June 1, 2014 We recently purchased a 1999 Baha Cruisers Weekender 313 and looking for advice on the fish wells. I noticed the fish and bait wells are dumping into the bottom of the boat and being bilged out. There is a hose laying in the bottom that goes to a thru hull port. I tried it but the angle is not good enough to drain well. Any owners out there do something creative? I do not like the idea of stinking up the bottom of the boat and working the bilge.I'm also looking for a boat manual if any baha owners might have one. I have the one for the sea max engines.Justin
Eco Posted June 11, 2014 Posted June 11, 2014 I cannot tell you exactly how mine is set up, but I have a proline with two large in floor fish boxes. They are both connected to a macerator pump mounted in front of the engine in the bilge.This slowly pumps down all the nasty fish slime and wash water to a side discharge with I think a check ball. Kinda like a scupper drain. I have looked into this pump cost and they are not cheep. Mine boat is a 1995 and the pump is still a working ariginal. I will replace the hoses when I get the chance to thourgh Yours may have had one and then it was not replaced if it went bad.
PolymerKnot Posted June 12, 2014 Author Posted June 12, 2014 Eco said: I cannot tell you exactly how mine is set up, but I have a proline with two large in floor fish boxes. They are both connected to a macerator pump mounted in front of the engine in the bilge.This slowly pumps down all the nasty fish slime and wash water to a side discharge with I think a check ball. Kinda like a scupper drain. I have looked into this pump cost and they are not cheep. Mine boat is a 1995 and the pump is still a working ariginal. I will replace the hoses when I get the chance to thourgh Yours may have had one and then it was not replaced if it went bad.Thank you Eco for the reply.I think i am going to change around the drain houses first to see if i can get a better flow. IF this does not work, i am going to install the Fish Box Evacuator pump from Jabsco.http://www.westmarine.com/bait-tank-pumps/jabsco--fish-box-evacuation-pump--11049921I like the flexibility of mounting and I'm concerned about the macarator pump reliability.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now