High diver/low diver set up

[Fishrmac]

I have a 17'sylvan fishing boat with 2 rod holders ahead of the windshield (one each side) and 2 holders in back. Do I run my high dipseys in the front with no ring on setting3 and in the back run rings on setting1 or 2?

[fishy1]

Yes run your high diver in the front holders and you can run them with the rings on them also I usually run my low divers on 1 or 1.5.

[ChampionShip]

I run my deep divers with wire and a mag with ring set on 1.5 in the farther aft and lower angled holder. High is the standard size with the ring set on 3 in a forward holder one click up from the deep diver.

[Far Beyond Driven]

10 years on my four winns and I still don't run 2 per side. Oddly it works pretty well on my 14' though. Shows how important set up is. Slide diver on 3 over a mag wire diver on 2, with the slide diver rod being a foot longer.

[EdB]

Can't go wrong with a lo mag wire diver and a regular diver as your hi diver like Mike and Kevin said.

[Fishrmac]

Thanks guys! Just braid dipseys for me right now. Wire some day.

[fishy1]

Thanks guys! Just braid dipseys for me right now. Wire some day.

You will get the same depth out of braid as you do wire so unless you like wire why change. I got rid of my wire years ago and see no advantage in using wire and my catch rate hasn't changed on my divers.

[ChampionShip]

You will get the same depth out of braid as you do wire so unless you like wire why change. I got rid of my wire years ago and see no advantage in using wire and my catch rate hasn't changed on my divers.

Yeah, I could take or leave the wire but still would run two per side both with braid