wingnut Posted January 10, 2013 Posted January 10, 2013 Thinking about swapping out the treble hooks to single hooks on some spoons. I'm trying to get a better hook up rate especially for steelhead. What style and size do you guys use.
pbrktrt Posted January 10, 2013 Posted January 10, 2013 We've been using 4/0 Siwash with good success. Most offer an open eye so they are easy to swap.
fishy1 Posted January 10, 2013 Posted January 10, 2013 I have used both single and treble hooks and the key is making sure thier sharp regardless which you use and I stick with treble hooks and as Dave Engel from Best Chance Charters says 3 hooks will catch more fish than 1 !
Line Dancin Posted January 10, 2013 Posted January 10, 2013 we tried the single hook fad in the early 80s on my dads baot. Didnt really notice and real difference in hook ups and lost fish. Buy owner trebles instead. I think the ones i get are called stingers - 36. I get them from outdoorsman in jenison bu the 50 ct bag. You wont be sorry. Then you'll see a hook up difference.
wingnut Posted January 12, 2013 Author Posted January 12, 2013 Thanks for the replys, No way can i figure out how a steelhead could smack a treble and still get off. I'll have to look for some premium sharp hooks.
pulpfishin Posted January 12, 2013 Posted January 12, 2013 The steelies (and kings), if not hooked up solid on a treble can use the other hooks on the treble itself as a lever to release the one that is lodged in their mouths. I agree that 3 hooks will most of the time catch more fish than one, but when it comes to feisty steelhead and big kings I would rather not give them a fulcrum to work their way off. Just my opinion.
LongLine Posted January 14, 2013 Posted January 14, 2013 I use 3/0 & 4/0 single hook depending on the weight of the spoon. Trebles are a pain in the net.
wingnut Posted January 15, 2013 Author Posted January 15, 2013 Has anyone ever tried a Kahl hook? Looks like a semi circle hook. To me it looks like once the fish is hooked up It would have a hard time spitting it out. I'm not sure if they make them with a big enough ring to swing freely on the split ring though.
danthebuilder Posted January 15, 2013 Posted January 15, 2013 I use this religiously.http://compare.ebay.com/like/310434346830?var=lv<yp=AllFixedPriceItemTypes&var=sbarI think this year i'm going to buy some owners hooks this year and put them on anything that catches more than 2 fish.
Line Dancin Posted January 15, 2013 Posted January 15, 2013 Thanks for the replys, No way can i figure out how a steelhead could smack a treble and still get off. I'll have to look for some premium sharp hooks.Go with the owners they are expensive but you wont regret it.
coralee Posted January 15, 2013 Posted January 15, 2013 Thanks for the replys, No way can i figure out how a steelhead could smack a treble and still get off. I'll have to look for some premium sharp hooks.One of the last steelies I boated had fought so hard it had a loose piece of bone that it had broken and had come close to ripping itself off. I think sometimes they just rip the hook loose and its not a hook itself issue. Depends on where it gets hooked. Another vote for Owners here also.
Rascal Trophy Fishing Posted January 15, 2013 Posted January 15, 2013 Big heavy VMC's are my ticket for years. Check hooks often after catching and resharpen as needed, even new hooks right out of the package.
1mainiac Posted January 15, 2013 Posted January 15, 2013 Owners are the answer they don't let go The problem with Steelhead is slack in the line they will charge the boat wrap the line around themselves and often shake the hook out. We had one a couple years ago that went nuts at the net and ran about half way thru the run I felt the hook let go and was bummed except a few seconds later I got a huge jolt on the rod and it felt like a much larger fish was on. When we got it back to the boat we were dragging it sideways as the line had wrapped around the fish and when it spit the hook it grabbed him in the middle of the back. When I am in Steelhead mode I consider 50% making it to the net a darn good day.
AllenW Posted January 26, 2014 Posted January 26, 2014 Owners are the answer they don't let go The problem with Steelhead is slack in the line they will charge the boat wrap the line around themselves and often shake the hook out. We had one a couple years ago that went nuts at the net and ran about half way thru the run I felt the hook let go and was bummed except a few seconds later I got a huge jolt on the rod and it felt like a much larger fish was on. When we got it back to the boat we were dragging it sideways as the line had wrapped around the fish and when it spit the hook it grabbed him in the middle of the back. When I am in Steelhead mode I consider 50% making it to the net a darn good day.Any suggested size/style for reg and magnum spoons?tiaAl
AllenW Posted January 28, 2014 Posted January 28, 2014 Any suggested size/style for reg and magnum spoons?tiaAlWell, an email to Owner hooks has yet to be answered, but a bit of research shows maybe a number 2 hook for regs and a 1 or 1/0 for mags.This sound about right?Al
AllenW Posted January 28, 2014 Posted January 28, 2014 Yup sounds right on the moneyThanks, a web search shows multiple styles, for spoons a short shank or ??Al
Chasin Posted January 28, 2014 Posted January 28, 2014 Standard and mag spoons I stick with trebles. Mini spoons and meat rigs I use singles exclusively.
TyeeMe Posted March 4, 2014 Posted March 4, 2014 All my trolling spoons have siwash hooks ,,,makes storage easy and the net is the biggest benefactor of a single hook ,,,I havent noticed any difference in hook up ratio I just spent this weekend pulling off the front trebles on my trolling stick baits that had 3 trebles ,,the VMC sureset on the back of my stick baits helps with hook ups tho
heaterman Posted March 15, 2014 Posted March 15, 2014 Have any of you ever tried circle hooks?Did some fishing with them in Florida recently and I was impressed.
SeaCatMich Posted March 15, 2014 Posted March 15, 2014 Have any of you ever tried circle hooks?Did some fishing with them in Florida recently and I was impressed.I use circle hooks with very good success using them bait fishing off piers. The idea with them is that as the fish moves off with the bait/hook the line will go into the corner of the mouth and then the hook imbeds in the jaw at that point. You shouldn't set the hook with a circle hook as it will pull out of the mouth and not hook the fish. For that reason they are not intended for use on "lures" where the fish strikes and the force of the strike sets the hook. Not the right hook style for spoons or plugs.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now