spoonfed Posted February 6, 2012 Share Posted February 6, 2012 Looks like the girl needs to be re-powered! Had a few issues at the end of the season, she ran darn good on 7 cylinders! Now im searching for a 350 long block roller motor. Anyone have a good source? Link to comment Share on other sites More sharing options...
HONDAM Posted February 7, 2012 Share Posted February 7, 2012 Oh yeah frank has one he'd give you a great deal on.Call calumet marine708-906-9862 Link to comment Share on other sites More sharing options...
luremaker Posted February 7, 2012 Share Posted February 7, 2012 Eric Why don't you have it rebuilt, then you have a new motor that will last another life time of seasons. I have a friend out of zeeland mi that rebuilds motors full time and you won't be sorry taking it to him and he loves to fish also.I believe jon from this site has used him last year. I also had him do all the prep work on mine and I put it back together and dropped it in.If you need his name and phone # I can send it to you. Link to comment Share on other sites More sharing options...
spoonfed Posted February 7, 2012 Author Share Posted February 7, 2012 It was rebuilt when we bought the boat, had 50 hrs on it. Now its at 1400 hrs. Has 1 dead cylinder and 3 with 100lbs of compression. It is bored 60 over so going for a new one. Have one on the stand to build, but April is coming fast. I found a 325 hp roller long block for 1200 with a 2 yr warranty Link to comment Share on other sites More sharing options...
N II Deep Posted February 7, 2012 Share Posted February 7, 2012 I'm very happy with the motor I swapped out last summer. I did get it from the guy out of zeeland. It was bored out .03" over. 1200 was what I paid. Pressure test your exhaust maniafolds for leaks, that's what killed my old motor Link to comment Share on other sites More sharing options...
GLF Posted February 7, 2012 Share Posted February 7, 2012 It was rebuilt when we bought the boat, had 50 hrs on it. Now its at 1400 hrs. Has 1 dead cylinder and 3 with 100lbs of compression. It is bored 60 over so going for a new one. Have one on the stand to build, but April is coming fast. I found a 325 hp roller long block for 1200 with a 2 yr warrantyDid you check the timing on this? Might just need a timing chain. Link to comment Share on other sites More sharing options...
spoonfed Posted February 7, 2012 Author Share Posted February 7, 2012 yes checked timing, thought that was the problem from the start Link to comment Share on other sites More sharing options...
prop nut Posted February 8, 2012 Share Posted February 8, 2012 get it leak down tested quick and easy way to find out whats wrong to early to be looking for a rebuld yet 1700 bucks from michigan motors hard to beat their quality vs price Link to comment Share on other sites More sharing options...
luremaker Posted February 8, 2012 Share Posted February 8, 2012 EricThere could be a number of things that make you lose a cyc , bad valve ,stuck ring ,hole in the piston ,weak or broken spring, I agree with frank do a leak test. The motor being bored a 60th is done for if it is in the bottom end 60th is max you want to go on it. but you still have a lot of time to replace it ,with the new motor in hand ,you can have it in and out in a weekend. Link to comment Share on other sites More sharing options...
spoonfed Posted February 8, 2012 Author Share Posted February 8, 2012 I did a leak down on it, didnt have time to pull the heads off it yet. Hoping a valve job will fix it. I know shes getting tired but i planned on swapping motor out next winter! will know more this weekend. Link to comment Share on other sites More sharing options...
luremaker Posted February 8, 2012 Share Posted February 8, 2012 ericif you have the heads done randy(zeeland) will do them cheap and his turn around it really fast. Link to comment Share on other sites More sharing options...
spoonfed Posted February 8, 2012 Author Share Posted February 8, 2012 Ok pulled heads today, had 5 bad valves. heads are going out tomorrow to get rebuilt. checked tolerance in the cylinders and they are within 1000 ths. going back together next week Link to comment Share on other sites More sharing options...
Just Hook'n Posted February 9, 2012 Share Posted February 9, 2012 I may be late getting to the conversation, but I had Randy (Zeeland) do a valve job last year and mine runs like a top. He does great work, does it quickly and is affordable. Link to comment Share on other sites More sharing options...
spoonfed Posted February 9, 2012 Author Share Posted February 9, 2012 What is randys contact info? Link to comment Share on other sites More sharing options...
luremaker Posted February 9, 2012 Share Posted February 9, 2012 1885 84th ave zeeland 772-1354There is randys home and phone number Link to comment Share on other sites More sharing options...
sherman51 Posted February 9, 2012 Share Posted February 9, 2012 get it leak down tested quick and easy way to find out whats wrong to early to be looking for a rebuld yet 1700 bucks from michigan motors hard to beat their quality vs priceif were talking about the same place, its called michigan motorz. i had a bad engine about 5 yrs ago. i bought a brand new 5.7 vortec 320 hp. it was called his silver package it came with everything from a duel line holley to the oil pan, even had distributor wires and plugs. and electric fuel pump. had to use my alternator and starter and power steering pump. but the best i remember it had everything elce. i talked to him and took the boat in. i think at that time he let me have it for 2900.00 then 800.00 to change it out for me. i took it in one morning and took it home that afternoon, ready to launch.but he has everything from rebuilt long blocks to complete engines. and he has deacent prices. just check out his website michiganmotorz.com then find out what you want, then call him, he may give you alittle better price than whats listed on his site. and he,s been around for a long time, so he covers his warrenties.now if i remember correctly in too deep had to replace his engine last year. and somebody on here hooked him up with a great price on a marine engine where they got there fleet engines. you might contact him and see if im right, and how everything worked out for him. just a thought.sherman Link to comment Share on other sites More sharing options...
spoonfed Posted February 9, 2012 Author Share Posted February 9, 2012 I just need to get the heads redone at this point. I have a engine im building for it this summer. Need to find someone who can rebuild the heads Link to comment Share on other sites More sharing options...
fishsniffer Posted February 9, 2012 Share Posted February 9, 2012 I just need to get the heads redone at this point. I have a engine im building for it this summer. Need to find someone who can rebuild the headsif your looking for someone in muskegon..varneys Link to comment Share on other sites More sharing options...
luremaker Posted February 9, 2012 Share Posted February 9, 2012 (edited) Call randy in zeeland he stands behind his work rips racing i think is what he calls his company but call the number I sent you its his home number. Edited February 10, 2012 by Nailer Link to comment Share on other sites More sharing options...
Nailer Posted February 10, 2012 Share Posted February 10, 2012 I spent some time talking with Randy when we picked up Jon's motor. This guy is the brightest/smartest engine machinist I have ever met. If you have work done by him, it will be at %100 of avoidable quality. Link to comment Share on other sites More sharing options...
jnj1hd Posted March 29, 2012 Share Posted March 29, 2012 Larry, I need a motor Whats the guys info in zeeland? thanks Link to comment Share on other sites More sharing options...
luremaker Posted March 30, 2012 Share Posted March 30, 2012 jayRandy Hilbrand1885 84th st.Zeeland Mi616-772-1354Here is the info on randy let me know if I can help any other way . He is a great person to work with and he knows his stuff. Link to comment Share on other sites More sharing options...
N II Deep Posted March 30, 2012 Share Posted March 30, 2012 jayRandy Hilbrand1885 84th st.Zeeland Mi616-772-1354Here is the info on randy let me know if I can help any other way . He is a great person to work with and he knows his stuff.I have a motor from Randy, great guy and even better work, prices are very fair Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now