Fishme00 Posted July 25, 2011 Posted July 25, 2011 Does anyone know if the TX 22's are better for pulling cores and copper than the walleye board? I just bought a walleye board from church and have used thier mini boards and tx 12's in the past. I now find myself second guessing and wondered what yous guys thought. thanks
SUPERTRAMP Posted July 25, 2011 Posted July 25, 2011 I use the Walleye boards almost exclusively. The only drawback I see is that the pin is prone to wearing thru and has to be replaced yearly. TheTX12 boards are ok in the spring for coho but with weighted lines anything more than 4 colors of Leadcore they are too small. The new TX44 is huge and I just cant bring myself to try them. I run 300' of 45# copper on the Walleye board and all I do is adjust the weight toward the nose of the board about 1/4" it works great and I catch a lot of fish on that set up.
mattmishler Posted July 25, 2011 Posted July 25, 2011 The 22s work fine, I have 8 of them 2 walleye boards and 2 44s. They all pull fine.
BenLubbs Posted July 25, 2011 Posted July 25, 2011 I've seen a standard Walleye boards pull 350 coppers just fine. I only have walleye boards on my boat.
N II Deep Posted July 25, 2011 Posted July 25, 2011 I use the wally boards with no issues pulling lead or copper, biggest copper I run is 300 45#, board runs a little close but no issues. also replace the plastic pin with Stainless Steel, I made my own, after two lost boards. zero lost since.
SUPERTRAMP Posted July 25, 2011 Posted July 25, 2011 I use the wally boards with no issues pulling lead or copper, biggest copper I run is 300 45#, board runs a little close but no issues. also replace the plastic pin with Stainless Steel, I made my own, after two lost boards. zero lost since.Jon: Can u post a pic of the steel pin and what matl did u use. Thx
WoLFMaN Posted July 25, 2011 Posted July 25, 2011 The new giant 44's pull like a dream. They plane much further out to the sides of the boat with a load of core or copper than a walleye board ever will. For anyone that is considering trying them, I highly recommend you do!
j1musser Posted July 25, 2011 Posted July 25, 2011 Always ran walleye boards. Bought 2 tx44 this year and they rock for big coppers. I was wondering about tx 22 as i just won one at the dreamweaver tourney saturday. Great timing!
Fishme00 Posted July 26, 2011 Author Posted July 26, 2011 Well good this all makes me feel better about the walleye board. You know the drill, just keep buying more boards until the moneys all gone!
Priority1 Posted July 27, 2011 Posted July 27, 2011 Then start over and buy some real boards. Offshore.
j1musser Posted July 27, 2011 Posted July 27, 2011 Then start over and buy some real boards. Offshore. C'mon Frank these r for salmon not them little walleye. Offshores will be half sunk straight back with just a spoon hanging. This man wants some SALMON boards!!!
N II Deep Posted July 27, 2011 Posted July 27, 2011 Jon:Can u post a pic of the steel pin and what matl did u use. Thx lets try a little market test, how many guys would switch to this style of pin and what would you pay, I have only made a couple handfull up on a manual lathe, but if I could get enough people to buy I could setup one of the cnc up over a weekend and run a couple hundred in a couple of hours. Would just need to cover the material, tooling and machine time - I'm sure the owner would not object as long as he is covered for cost. jon.
skunked Posted July 27, 2011 Posted July 27, 2011 I've used this cut off aluminum nail for years, works great
Fishme00 Posted July 27, 2011 Author Posted July 27, 2011 I have one offshore for the starboard and now this walleye board for the port... I am not married to one manufacturer. But i do like the speed with the pin on church boards...1-0 church tackle...the game aint over. I would think that offshore will be putting some new designs or sizes out soon, inlines are blowing up like the backstreet boys!
Sea-Mac Posted July 27, 2011 Posted July 27, 2011 C'mon Frank these r for salmon not them little walleye. Offshores will be half sunk straight back with just a spoon hanging. This man wants some SALMON boards!!! Frankly... I gotta agree with Frank. Church boards have the word "Walleye" directly on them... The tx-22 is a decent board. I like them for the fact you can switch them to run on either side. For salmon i have run Offshores, church tx-22s, z-boards, and orange church "walleye" boards and like them in that order. With a few minor adjustments/improvements on every board.
Line Dancin Posted July 28, 2011 Posted July 28, 2011 Frankly... I gotta agree with Frank.Church boards have the word "Walleye" directly on them... The tx-22 is a decent board. I like them for the fact you can switch them to run on either side. For salmon i have run Offshores, church tx-22s, z-boards, and orange church "walleye" boards and like them in that order. With a few minor adjustments/improvements on every board. I gotta agree i had some walleye boards and use all offshore boards for coppers. When i went to otter boats for walleye the walleye boards were sold. I think they make a better diver than a board when you have heavy lines on them and i dont care how much you adjust the weight. I played that game. I am getting a set of tx-22s for running over 300ft of 45 lb copper for next season.
Pioneer Posted July 28, 2011 Posted July 28, 2011 I have been pulling tx-44's all year, 200-400 foot coppers with flasher/flys pull great. My walleye boards don't see much water time now.
Adam Bomb Posted July 28, 2011 Posted July 28, 2011 I run both church and offshores. I run offshore for walleye and the churches for salmon. That said, i have used both on big coppers and IMO, both work, but are really starting to get overtaken by those 300'+ 45# coppers as they lag back considerably. And i must not be the only one thats not liking that as since the popularity of copper and big coppers has increased youve seen larger boards come into the market place to tow them better. Z-Boards and now Church has come out with a bigger one to accommodate them . Im gonna get some of these larger boards just for these lines to hopefully counter act that lag back....besides, what another 4 or 6 when you already own close to 40...lol
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now