Fish Hawk calibrations

[Boltman]

Has anyone who has a Fish hawk Probe had to calibrate the temp settings?

My probe is reading right around 5* depth temp, thinking this might be a little off, please let me know how you did the calibrations for the temp settings?

[Nailer]

Is it possible it's reading in Celsius?

[silver one]

Has anyone who has a Fish hawk Probe had to calibrate the temp settings?

My probe is reading right around 5* depth temp, thinking this might be a little off, please let me know how you did the calibrations for the temp settings?

not sure but try getting online and see if you can find set instructions or call the manufacture. sometimes they will email them to you in a pdf file.

[GLF]

Has anyone who has a Fish hawk Probe had to calibrate the temp settings?

My probe is reading right around 5* depth temp, thinking this might be a little off, please let me know how you did the calibrations for the temp settings?

Is this the X-4 or the old style(840)? Unfortunately, my directions for doing this with an 840 are on the boat.

When setting checking your temp of the probe, make sure it is at the same depth of the temp transducer on the back of your boat.

[dipsey diver]

yes,I had to reset the top tranducer temp setting it was off about 4 degrees. my lowarance sonar was always reading hotter than the fishhawk one. the probe seems to be alright. I have the new x-4 system. its very easy to recalabrate,just hit the set button till the parameter you want to set comes up and use the up and down arrows to change the reading.