Ken

Ok, update........... new starter........ had the old one tested.....junk....... new ignition switch,fresh batteries.......new 50 amp breaker............turn the key,the boat turns over great, just won't fire....... going to check the dis cap tomorrow....... check for spark..... man i'm running out of time.............

Starter is new.

Jumped solenoid,with key on..boat turned over and actually started. Shut it off and turned key no click just silence...guessing ignition switch is the problem.50 amp breaker looks like it tripped,but can't tell. Gonna replace it .

Brand new cables both sides......... battery terminals were cleaned and greased..It's getting power, just won't turn over.going to try to jump the solenoid.....

the batteries i have ,use the small post/wing nut set up, great for solid hook ups............

Tried that............ when the key is turned, it clicks, just once.......... going to try to jump the solenoid tomorrow....... hoping it's not the starter, but due to the crappy boat cover i had, it filled with water,when ,when i took it off, sent the water towards the stern of the boat.......... a LOT of water.

Went to start my boat.......solenoid clicks....nothing happens......... newer starter 2 years ago....... batteries are fully charged. And ideas? Guessing the solenoid or the starter..........

now, i either have to find a pigtail for the Raytheon fish finder or try to figure out a way to remove the fishfinder and it's 50+ feet of cable, and install a Hummingbird in it's place...........

Anyone have a suggestion? Seems my L750 doesn't run right.........sounds stupid,but i have dual batteries on my boat, for some reason i kept starting it with just one battery switched on, (stupid mistake)......but when the fishfinder was on it would flash either 00 or 99.......thinking that when the voltage isn't right,the fishfinder won't work right.the problem is, i seem to have lost the pigtail from the fishfinder, i know the history of the raytheon L750 isn't the greatest but i can't troubleshoot the problems without the pigtail.can anyone help me out here?

Ok, new problem, my boat is set up with a Raytheon fishfinder.......... ell it crapped out, still displays but flashes and doesn't show depth or anything, wanna replace it with a Hummingbird. but can't seem to figure out how to pull the cable out

After buying 2 3 position switches from Ebay,along with 2 10A brekers...... i have been able to eliminate both boxes from my cannon 10As.............thanks to the guy who made the switches, this saved me some serious cash.........

After buying 2 3 position switches from Ebay,along with 2 10A brekers...... i have been able to eliminate both boxes from my cannon 10As.............thansk to the guy who made the switches, this saved me some serious cash.........

I know this has been covered before. but i need some help........ got a 1992 Glasport,with fishing tackle, a 20hp honda outboard..........and 2 down riggers as well as electronics...... the downriggers function if you direct connect them to a battery but the boxes don't work.......i'm trying to eliminate the boxes.and go with a 3 way switch....... this has got to be possible.. i need something that slows the decent/accent..with direct power the damn thing hauls ass and tangles the wire.......... can ya'll give me a hand on this? Trying to get them set up for my dad............