Hotdog71

Well this one is far from new. Pretty severe boat rash on the chrome rings, gear broken, part of drag missing, screws missing and the pawl looks like someone used it for a screwdriver. Other than that.... it's still ugly.

I recently picked up a Sealine 27l c. My intention was to fix the reel and sell it. The further I got into the reel, I found that there was no way to make any money on it with everything it would take to repair it(about $40). So my question is this: Is the reel popular enough to part out? If I sell parts from it can I get $10,25,40? Or is this a reel once it's broken, throw it out, it's not worth fixing? Or fix it and use it? I have heard that many walleye fisherman use this reel, but I have no idea if it's true. I do some fishing in the boundry waters of MN, but I haven't ever used or needed a lc for it. I'm not sure what to do with it now. Any suggestions????

Well, we bumbled around again last night starting at 120 out to 210 and back. Had absolutely nothing on the trip out. Picked up a small shaker at 201 on a blue dolphin 75 down on a rigger. Dad released it along with the contents of his shirt pocket- glasses in a case, pencil, receipt, 8GB sd card. Looped around to find the glasses and receipt but no pencil or sd card. If you find a card out there let me know Anyway, we made it in to 118 fow and picked up a nice 15# king. It hit our dipsy 150 back pulling a no see um fly. I don't know if it's me or not, but we are not finding the fish real well this year. Anyone else fishing Grand Haven? Similar results? Keep um' tight!

Doesn't matter what depth, they're everywhere. Get some flea flicker line by cortland. Use it for your downrigger lines. I bought 300 yds and split it between 2 reels with regular mono backing. Nothing on my lines since I changed. It's total Awesome Stuff! A little expensive. Cold Water tackle had best price I found. As far as when they go away- end of July first part of August.

Headed out to 120 fow at 6:30 last night. Took a laker on blue dolphin down 75 on a rigger. Doubled on both riggers (blue dolphin and mongolian beef) while resetting copper. Landed small dink and the other took out the leadcore and copper being reset and lost it 10-15 ft from the boat, 5-7lber. Took another hit on the dipsy landing a small king. 3 for 4, not bad but not real big fish. It was a bit bumpy out there but not terrible. Keep um' tight

Headed out around 6 last night. Fished 120-220 fow. Had a hard time finding anything out there. Saw a few bait pods but that was about it. We had 1 hit in 196 fow. Dipsy 125 ft back on a 1.5 setting pulling a polar ice fly took a 8# king. Took a second king in 120 fow on a dipsy 150 ft back pulling a no see um fly, 13#. Ended the night a little early due to family coming in. Hopefully we'll have a better report for the next trip out. Keep um' tight

Another vote for the flea flicker line. This is my first year using it and it has made a huge differencefor me when running my riggers.

Another vote for the sealer. I just finished last years catch two weeks ago. Fish came out like freshly caught.

Went out with Mom and Dad last night. Got on the water about six and fished until ten. Still really slow. I heard a couple fish caught in the 200 ft range but not a lot of action. Our fish came on a blue buble flasher with a polar ice fly off a wire dipsy 125ft back. The 15# king hit in 123 fow. We had a couple more releases like the other night so I think the 12-14 inchers are still in the area. Hopefully the June swoon is close to ending. Keep um' tight!

Well Jim, That's what I was thinking. So, if that's not it I guess we're both wrong. Thanks for the thoughts.

I'm sitting here watching the waves in the bayou and I got to thinking. How long does it take for the lake to setup? Does it take a couple of days with the wind coming in from the right direction? Is it a week? I don't recall if the lake ever setup last year. Maybe I don't know what the lake would look like setup. What would you say it means when the lake is setup? How would you describe it?

Nice job Matt. Way to whack em'.

Decided to try our luck again last night. Headed out to 120 fow and set up going south. Fished 120 to 130 on north south trolls picking up a laker and 3 kings. 2 of the kings were only 12-14 in and were returned to the lake. We also had a quick rip on the diver as well as 2 short hits on riggers. We think it was the same size kings, mouths barely big enough to get the hooks in. So we came home with 2 but I guess you could say we were 4 for 7. Blue dolphin mag on rigger 110 down, blue bubble flasher w/ polar ice fly on dipsy 180 back, flounder pounder 300 #45 copper, and mongolian beef on rigger 90 down were the active participants last night. Just a side note- Sea fleas got us good the other night so I brought out the flea flicker line last night. This is the first time I used it and boy was I impressed. Zero flea issues. I had 12 inches of fleas on my wire divers when I brought them in, nothing on the rigger lines. Should have bought it sooner. Keep um' tight

Like everyone else, Grand Haven fishing over the last week or so has really stunk. Decided to burn some gas last night to see if we could get the smell of skunk out of the box. We started in 80fow, temp 63 @ 60ft, headed west. Trolled out to 200ft with no action. Came back in to 120ft, no action. Headed a little deeper and finally hooked into one. 100ft down, 125 fow, on a blue dolphin. It tried to get off by going into the dipsy, so I brought that in to find a shaker attached, drowned. So we got two. 1-2#, 1-15#. Finally something positive to report. Let hope the lake sets up and we can have more production. Keep um' tight!

Nice job Dan. Whatever it takes to keep the striped cat out of the box.

Welcome Scott. This is a great site. Let me know if I can help.

No problems here.

My grandpa left us a 1974 Evenrude 9.9. We had it worked on several years ago, but the job wasn't great. Does anyone know of a marina/person that works on old 2 cycle motors around the Grand Haven area?

Well done everyone! I'm green with envy.

I just picked up a used Shimano 800(no LC) and was wondering what to look for when cleaning it. It looks like its been well used, but not recently.There is some grime and junk on the levelwind guide rod. It appears to be from dust geting in the grease and a spider nest. The rest of my reels are Okumas, so I wondering what might be lying in wait in this reel. Any problems that have been occuring with the Tekota's I should look for? Any problems with certain parts wearing or breaking that I should check? Also, I'm wondering what I should put on it? I have several of reels with copper and several with leadcore. What setup is best for this reel? I currently have 2-300' 45#cu, 1-300' 32#cu, 1-150' 45#cu, 2-full core, 2-7 color, 1-5color, 4-4 color, 1-2 color, 1-1 color Thanks for the thoughts,

Only the cannon rod holder still available.

Here's another link

Got you added Dave. You can reach me at 630 921 1829. I won't be heading over until Thursday evening.

All rod holders are * SOLD *

I'm hoping to get the boat in on Friday and maybe do some fishing Saturday morning. Not sure about Sunday yet. I'll be out of Grand Haven.